Steps

Tools

Order Of Exercise

1. Chiseling

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Half-lap Joint

2. Lay out and cut under part A.

3. Nailing

2. 3-4 Inch chisel

3. Lay out and cut half-lap joint.

4. Nail setting

3. Hammer

4. Sandpaper and glue together.

4. Nail set

5. Nail on top. using 1-lnch No. 17 brads.

5. Marking gauge and try-square

6. Shellac and polish.

6. Block and Jack plane