Steps

Tools

Order Of Exercise

1. Fitting square joints

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Curve sawing

2. 1-8 inch drill and bit stock

2. Mark out curves on each piece and cut.

3. Screwing

3. File and screw-driver

4. Try-square and marking gauge

3. Screw and glue brace to back.

5. Block and Jack plane

4. Screw and glue top to back.

6. 11 inch No. 10 screws

5. Finish and polish.

7. 11/2 inch a. H. B. screws