Steps

Tools

Order Of Exercise

1. Rip and backsawing

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Narrow surface planing

2. Draw outline, using knife.

3. Squaring

2. Rip and backsaw

3. Bore, and glue in dowel A.

4. Gauging

3. Jack plane

4. Bore holes for dowel B.

5. Boring

4. Try-square

5. Saw. using back and ripsaw.

5. Marking gauge

6. Place dowel B in position and brad.

6. 1-4 inch bit

7. Sandpaper and shellac.

7. Hammer