The woodwork used for finishing a house, as distinguished from that which forms a structural part of it, may be divided into two portions, one comprising the "standing finish," including the bases, frames, and architraves of doors and windows, wainscoting, panelling, mantels, and other ornamental woodwork fixed in position; while the other will include the floors and stairs, which are usually of different material from the doors and standing finish, and require very different treatment. As, however, the treatment of floors and stairs is much simpler than that of woodwork of other kinds, it will be best to consider it first.

Floors to be covered with carpets are best made of white pine, where it can be procured. Clear pine is extravagantly costly, as the supply is very limited, but in certain districts, where the forests have been replanted, second quality pine can be obtained at a moderate price, which, although it contains many knots, and is unattractive in appearance, is soft, so that tacks are easily driven into it, shrinks little, and lies permanently flat, so that carpets laid over it wear well. It is, however, unsuited for staining or varnishing, as it is so soft that the stain soon wears through, and the knots show even through a dark stain. On account of the greater expense, as well as the rougher appearance, of second quality pine, most builders make floors intended to be carpeted out of spruce, which is cheap, nearly free from knots, and white and agreeable in appearance when fresh. Its disadvantages are that floor-boards made of it are disposed to curl up at the edges, forming ridges, which greatly hasten the wearing-out of a carpet laid over them; while there is little adhesion between the annual rings of the tree, so that the wood, when dry, particularly if cut from old trees, is liable to splinter. Although spruce is not quite so soft as pine, tacks are easily driven into it, and it makes a tolerably attractive floor when stained; although the stain soon wears through. The best spruce flooring for staining is that cut from sapling trees, the wood of which is much softer, and less disposed to splinter, than that from old trees.

Floors.

Pine floors.

It is very common to stain floors of soft wood, such as pine or spruce, either all over, or around the edges, leaving the middle to be covered with a rug; and amateurs often find much satisfaction in experimenting in this way. Although oil stains are sold for the purpose in cans, ready mixed, and labelled "light oak," "dark oak," "cherry," and other colors, and can be put on with little trouble, they are apt to give a muddy effect, unless made very dark; and the best results are obtained, although with more trouble, by using water stains, which can also be bought of various colors, ready for use. These soak much better than the oil stains into the grain of the wood, and give a clearer color. They must, however, be varnished after they are thoroughly dry, using two, or even more, coats of some first-class floor varnish, such as Murphy's, Crockett's, Rosenberg's, the Detroit Varnish Company's, or many others. Such varnish as this cannot be bought for less than $13.50 or $4.00 a gallon; but it is a waste of time to put on a cheap varnish, which will either be so sticky that dust will cling to it, and soon blacken and ruin the floor, or will contain rosin, so that every spot of water, and every nail in a boot-heel, will make a white mark on it. As it is the varnish which defends the floor against wear, it is hardly possible to put on too much of it, and it is impossible to have it too good. If the skill of the artist is not sufficient to put it on evenly, it may be rubbed with fine sandpaper, to smooth it, before the last coat; and a good effect, less glittering, as well as less slippery, than the plain varnish, may be obtained, after the last coat of varnish is dry, by going over it with a little floor wax, and polishing with a rag or brush. An oil stain is also greatly improved, both in appearance and durability, by varnishing, and in appearance, although not much in durability, by waxing; but it never acquires the transparency and clearness of a well-varnished water stain.

Spruce floors.

Staining floors.

In order to preserve the appearance of a stained floor, it should be watched for signs of wear, and the worn spots retouched with varnish before the protecting covering is worn through. If the wear penetrates the varnish, and reaches the stain, it is difficult to patch it so as not to make a spot.

Even if the floor, before staining, is already worn or splintered, it can be made presentable by planing out the splinters or worn places, so as to expose a new and fresh surface. It is not necessary to go to the expense of planing the whole floor. Although planing only in spots will leave the surface uneven, this is not a serious fault in a floor, in comparison with a good color and pleasant gloss. The oak floors of an old French palace are usually anything but even, yet they lose little of their effect in consequence.

Where a soft-wood floor is too much worn and splintered in the middle to be worth staining, but is in tolerable condition around the edges, as is often the case, a good effect can be obtained by staining only the border, leaving the middle of the floor to be permanently covered by a large rug, or "art square" carpet, or, still better, by a special composition, consisting of a centre of a plain-colored velvet or tapestry carpeting, selected to suit the scheme of color intended for the room, with a border of either tapestry or Brussels, the latter being in some respects preferable, as the contrast between the cut pile of the tapestry or velvet centre and the uncut pile of the Brussels border makes the centre look softer, and there is a greater range of Brussels borders to choose from. The border may, of course, be of any width, but, as a general rule, the full Brussels width of twenty-seven inches would be suitable only for a rather large room, and an eighteen-inch border would be better in most cases. If plain tapestry or velvet carpeting cannot be found of a suitable color, felt will answer, but it is less easily kept clean than a material with a cut pile. In any case, the housekeeper is likely to hear animadversions from the neighbors on the folly of using plain carpeting, which "shows every mark"; but people who have to consider economy may console themselves by the reflection that a plain carpet, if of reasonably good quality, wears much longer than a figured one, partly because certain dyes corrode the wool in figured carpets, and cause the figures of that color to wear through first, and partly because some dyes fade more than others, and the fading of the figures of the most fugitive colors makes the whole carpet look shabby; and those who look to artistic pleasure, as well as economy, will find themselves repaid a hundred-fold for a little extra trouble in brushing by the restfulness of the broad mass of color in the middle of the room, softened, as it always is, by the varying shadows upon it, and even by fading, which lends tone to a plain carpet where it only brings shabbiness to a figured one. In case an effect of special interest is desired, a beautiful rug may be made by embroidering on plain carpeting, using in preference naturalistic motives, such as a spray of wild roses, or of trailing arbutus, or various other flowers. The embroidery should be large and simple, to be effective, and can be done in worsted or silk, or a mixture of the two.