This section is from "Scientific American Vol. XVII, No. 26", by Munn & Co. Also available from Amazon: Scientific American Science Desk Reference.
2d, A screen for separating the oxide of zinc from the fumes and gases of burning zinc ore, composed of ground cork, hair, wool, sponge, or other suitable or similar material, confined within a suitable chamber, substantially as set forth.
72,033.-REGISTER FOR ODOMETERS.-Henry F. Hart, New York City.I claim the arrangement in an inclined position of the counting wheels, 1, 2, 3, 4, 5, and 6, upon shafts of equal lengths, in combination with the notched and perforated lid, B, as herein shown and described.
72,034.-NECKTIE.-Wm.H. Hart, Jr., Philadelphia, Pa.I claim a bow or tie, A, having an elastic loop or cord, B, arranged horizontally at its rear, with both of its ends free, for the purpose substantially as described.
72,035.-ELLIPTIC CARRIAGE SPRING.-Horace R. Hawkins, Akron. Ohio.I claim an elliptical carriage spring composed of a single piece, F, or two separate pieces, E E, of steel, united by means of blocks and bolts, substantially as herein shown and specified.
72,038.-HATCH-LINING DRAWINGS.-E.K. Haynes, Hanover, N.H.I claim a straight-edge or scale having a mechanism for effecting an intermittent movement of the same, substantially as described.
Also in combination therewith the tongue, q, tor angular lining, substantially as described.
Also in combination with the feed mechanism, a mechanism for presenting the straight edge in positions radiating from a center, substantially as set forth.
72,037.-PLATFORM SCALE.-D. Hazzard, Milton, Del.I claim the Hollow stand, A, the spindle, C, the springs, D, the elastic rod, G, and the graduated plate, H, in combination and arranged substantially as shown and described tor the purposes set forth.
72,038.-PIANO LOCK.-Adam Helmstaedter, Newark, N.J.I claim the pin, a, secured in the oscillating hook, C, and catching in a slot in the hook, C', substantially as and tor the purpose described.
72,039.-TWEER.-John B. Himberg, Frederick City, Md.I claim a tweer consisting of the box, A, annular cover, C, with a convex under side, and of the removable ring, E, from which the concave plate, F, is suspended, all made and operating substantially as herein shown and described.
72,040.-LAMP FOR BURNING PETROLEUM.-James Hinks and Joseph Hinks, Birmingham, England.We claim, 1st, Constructing the burners of the said lamps substantially in the manner hereinbefore described and illustrated in figs. 1, 2, 3, 4, 5, and 6, of the accompanying drawings, that is to say, the combination in the same burner, of two or more flat or curved wick cases or holders, in which two or more flat wicks are placed, so as to produce thereby two or more flat flames or elliptical of nearly circular flames.
2d, Constructing and arranging the shade holders or galleries of the said lamps for the purpose of admitting air to the flames, substantially in the manner hereinbefore described, and illustrated in figs. 7, 11, 12 13 and 14, of the accompanying drawings.
3d, Supporting the shade holders or galleries in a vase, or cup on the top of the pillar of the lamp, and supplying air to the lamp through the said pillar or vase, or supporting them in a cup or vase without a pillar, the air in this case being supplied through the vase, substantially in the manner hereinbefore described, and illustrated in fig. 7 of the accompanying drawings.
4th, The improvement described and illustrated in figs. 11, 12, 13, and 14, of the accompanying drawings, for isolating the shade from the shade holder or gallery.
5th, The arrangement or combination of the parts of punkah-protectors or wind protectors, substantially in the manner hereinbefore described, and illustrated in figs. 7, 8, 9, 10, 11, 15, and 16, of the accompanying drawings.
72,041.-DEVICE FOR LASHING AND BINDING.-John M. Hirlinger, Red Rock, Pa.I claim the cord, A, provided with the links, B and C, hooked lever, D, and slide, E, with its ring, a, arranged and used as and for the purpose set forth.
72,042.-TOOL FOR OPENING FRUIT CANS.-Horace Holt, New York city.I claim, 1st, A tool for opening sheet metal cans, composed of a hand lever, B, carrying a tooth, c, and connected to tongs, A, or other equivalent means, capable of clamping said tooth-carrying lever to the can, as set forth.
2d, Placing the tooth, c, in an oblique direction, when the same is used in combination with the hand lever, B, and clamping device A, substantially as and for the purpose described.
3d, The raised bearing, d, in combination with the lever, B, and clamping device, A, substantially as and for the purpose set forth.
72,043.-MOP WRINGER.-Zadok Howe, Lowell, Mich.I claim the treadle, G, and spring bail, E, in combination with the rollers, B and C, the same being used as and for the purpose specified.
72,044.-MACHINE FOR MAKING EYELETS.-David K. Hoxsie, Providence, R.I.I claim the combination of the eyelet forming punch, C, the eyelet forming die, e, and the punch, G, arranged and operating substantially as herein described, for the purpose set forth.
Also, in combination with the eyelet forming punch, J, and cutting punch, H, as described, the spring or snapper, g, arranged and operating substantially as described, for the purpose specified.
72,045.-RAILWAY SLEEPING CAR.-George W. Hunt, Hopkinton, Mass.I claim the construction and arrangement of the backs of car seats, by which the whole of some of the backs, and parts of others, are formed into berths, in connection with adjacent seats, substantially as described.
Also, the combination of the leaves, n, p, and q, hinged as shown, and to fold together, for a day car, or to be extended and made into a berth for a night car, substantially as described.
72,046.-HARVESTER.-George M. Jackson, North Hector, N.Y.I claim the arrangement and combination of the toothed wheels, S and T, crank, U, box, W, of the hinged frame, V, adjustable finger bar, J, hoisting rope or chain, Y, and lever, Z, when constructed and operated as herein described and for the purposes set forth.
 
Continue to: