3d, Also, the combination of the damping screw, h, with the arm, and the tooth applied to such arm by a tenon arranged at an obtuse angle with the axis of the tooth as specified.

4th, Also, the arrangement of the rope, or its equivalent, with the several arms and their teeth, and the braces thereof, the said rope being to operate as and for the purpose specified.

72,007.-PUNCH FOR FORMING CLASP.-Charles D. Flesche, New York city.

I claim the sliding punch, B, in combination with the plates, A A', cutters, b b, an spring, e, substantially as and for the purpose herein shown and described.

72,008.-SELF-FASTENING SPRING FOR WEBBING.-John Flinn, Philadelphia, Pa., assignor to Archer Steel, same place.

I claim a spiral spring, for webbing, having the wire at one end of the spiral coils, A A, bent in the manner described and shown by B C D E, for the purpose specified.

72,009.-CARVING KNIFE AND FORK HOLDER.-Alden T. Foster, Albany, N.Y.

I claim, as an article of manufacture, the dish or stand, A, constructed substantially as described, with notches, a a and c c, as and for the purpose set forth.

72,010.-LAMP CHIMNEY.-Sam'l W. Fowler, Brooklyn, N.Y.

I claim the construction of the glass chimney, with its concave and convex deflectors, J and E, on each side, and collar, B, beneath, with its projections, C C, as herein described and for the purposes set forth.

72,011.-CARTRIDGE BOX.-William Freeborn, Tivoli, N.Y.

I claim the square box, A, made of leather or any suitable material, when constructed with a series of round, fluted, or ruffled holders, B, on the inside, made of any firm or flexible material, a series of holders, B, being attached to each flap, C, in front, and the flaps buttoning to the sides of the box, A, as herein described and for the purpose set forth.

72,012.-DEVICE FOR HITCHING HORSES.-Samuel Galbraith, New Orleans, La.

I claim the device above described, consisting of the rings, A and B, and the pivoted curved jaws, C C, meeting at one extremity at e' e', and connected at the other by means of the rods, r r, and springs, s, working in the tube, substantially as and for the purpose specified.

72,013.-CAPPING SCREWS.-J. Gardner, New Haven, Conn.

I claim, 1st, Cutting away or depressing the cap at the point where it meets the nick in the screw head, substantially as described, so that such cut away or depressed portion, while connected with and forming part of the cap shall lie within outline the nick in the screw head, as set forth.

2d, A capped screw in which the slot or depression in the cap corresponding to the nick in the screw head is forced, substantially in the manner and for the purposes herein shown and described.

72,014.-TIGHT AND LOOSE PULLEY.-Joseph P. Gates, Lincoln, Ill.

I claim the construction of the pulley, e, in two sections, with the arrangement and combination of the ram spring, F, the rebound guard, G, the stop flange, I, the case dog, J, and spring, K, the case dog ram, L, the shuttle key, P, and stands, Z, and arm, b, with cam, a, when constructed, arranged, and operated as herein described and for the purposes set forth.

72,015.-BRICK MACHINE.-Samuel Gissinger, Allegheny City, Pa.

I claim, 1st, The device for moving the mold on to the roller way, G, consisting of the arm, l, held by a spring, m', lever, m, pin, n, on the gear wheel, o, and block, j, moving in the slot, h, substantially as described.

2d, The device for moving the molds under the hopper, consisting of the gear wheel, p, operated by the gear wheel, c, arm, k', and block, k, moving the slot, l, substantially as described.

3d, In combination with the above, the gear wheel, o, shaft, B, grinding knives, C, stationary knives, D, and fillers, F, in the hopper, A, substantially as and for the purposes described.

4th, The roller way, O, provided with openings and rollers, g and g', substantially as and for the purposes described.

72,016.-HARVESTER RAKE.-James H. Glass and Albert J Glass, McGregor, Iowa.

We claim, 1st, The combination of the wheel, L, with the rake wheel, A and arms, C, substantially as herein shown and described and for the purpose set forth.

2d, The combination of the cam, O, and bent or crooked lever, M, with the shaft N, of the gear wheel, L, and with the arm, I, rigidly connected with the switch, F, substantially as herein shown and described and for the purpose set forth.

72,017.-METHOD OF MOLDING PLASTIC MATERIAL.-Wm. B, Gleason, Boston, Mass.

I claim the process substantially as and for the purposes specified.

72,018.-HAND CULTIVATOR.-Wm. C. Goodwin, Hampden, Conn.

I claim, 1st, The combination of the frame, C, with frame, G, and the set screws, x and y, and binding screw, f, when they are constructed, arranged, and fitted for adjusting the blades, substantially as herein described and set, forth.

2d, The combination of the blade with the foot and shank, when the foot is made with a keel, like v, to guide the blade and strengthen the shank, substantially as herein described and set forth.

3d, The combination of the handle, D, with the frame, G, when the handle is made adjustable by means of the tongue, h, and set screw, j, and the whole is constructed, combined, and fitted for use substantially as herein described and set forth.

72,019.-APPARATUS FOR MAKING DIPPED CANDLES.-Peter R. Gottstein, Houghton, Mich.

I claim, 1st, The combination and arrangement, substantially as described, of the weighted cistern, B, car, A, and straps, C, for the purpose set forth.

2d, The combination of the cistern, B, car, A, and track, I, substantially as and for the purpose described.

3d, The combination and arrangement of the slab or board, J, with the weighted cistern, B, substantially as and for the purpose described.

4th, The new process of producing dipped candles by raising the molten tallow or other liquid to the wicks, substantially as described.