3d, Casting graining or other ornamental configurations on conical rolls so as to form a continuous body, for the purposes herein described.

4th, Making die or printing conical rolls in sections, and securing them to the staves so as to change their position for making a greater variety of ornamental designs for graining and ornamenting hollow ware, substantially as and for the purposes set forth.

5th, Applying a smooth coat or body of paint or varnish with a flexible roller to pails, tubs, or other articles of hollow ware, substantially in the manner herein set forth.

71,979.-SAWYERS' RULE.-Thos. Carter, Louisville, Ky.

I claim, 1st, A scale so constructed and adjusted that any two of the three quantities of the thickness of the planks, the diameter of the log, and the number of the planks cut or to be cut from the log being given, the third of said quantities is read off from the scale in the manner substantially as above set forth and described.

2d, A scale exhibiting the number of turns to be given to the screws of the log carriage for cutting plank or boards of any desired thickness.

71,980.-CAST METAL CASE FOR SPRING BALANCE.-John Chatillon, New York city.

I claim a cast metal case for spring balances, when provided with a perforated or slotted upper head for the reception to the pin, b, and when made substantially as and for the purpose herein shown and described.

71,981.-VACUUM GRAIN DRYER.-Geo. Clark, Buffalo, N.Y.

I claim, 1st, the three essential features or parts: the air tight grain chamber, the radiations heating pipes or floors, and the vacuum-producing apparatus, combined and operating substantially as herein set forth.

2d, the arrangement of the steam heating pipes within the grain chamber, substantially as set forth.

3d, The graduated gage vessel, H, arranged as and for the purpose set forth.

71,982.-DOOH LATCH.-Francis Clymer, Galion, Ohio.

I claim the mode of attaching a combined latch and hasp, B, and staple, F, to doors, by means of slots, I and H, so as to permit the adjustment of the same substantially as set forth.

71,983.-CLAMP.-Geo. H. Coo and Geo. H. Snow, New Haven, Conn.

We claim the herein described clamp, consisting of the head, C, upon one arm of the body, [Transcribers note: illegible letter], the opposite arm, provided with a corresponding foot, and the said head having arranged therein levers, D, and combined with a screw, B, so as to operate to clamp between the screw and the foot, substantially as set forth.

71,984.-BOAT DETACHING TACKLE.-David L. Cohen, Pensacola. Fla.

I claim the combination of the notched bars, a a, with the grooved blocks, B B, the sliding blocks, C, pitman, D D', and lever, F, substantially as and for the purpose described.

71,985.-APPARATUS FOR ELEVATING WATER.-J.R. Cole, Keaton Station, Tenn.

I claim, 1st, The combination of the chamber, F, provided with the short pipes, p p', and the pipes, p", with the pumps, G H, and the chambers, C D E, substantially as and for the purposes described.

2d, The combination and arrangement, for the purpose described, of the chambers, C D E F, pipes, p p' p", P P' P", and pumps, G H, the latter working alternately, so as to maintain a constant pressure upon the water in the chambers, substantially in the manner specified.

71,986.-TACK HAMMER.-Thomas A. Conklin, New Britain. Conn.

I claim, as a new article of manufacture, a tack hammer, constructed in the manner and With the characteristics herein specified, for the purposes set forth.

71,987.-FLOOR CLAMP.-Wm. Conner and C. W. Mitchell, Wilmington, Del.

We claim the combination of the frame, a, with the screws, b and d d, with the wedge blocks, e e, wedges, f f, and plates i i, constructed and arranged, as herein described, to operate as a clamp for clamping ship timber, flooring, and other carpenters' work.

71,988.-BUTTON.-Geo. Cooke, Winchester, Mass.

I claim a button or stud, its shank attached by means of a disk formed concave, and subsequently compressed, substantially as described.

71,989.-HARVESTER.-Francis C. Coppage, Terre Haute, Ind.

I claim 1st, The combination of the double or alternate step wheel, E, having the inclined steps, e e e, with the two stepping-dogs, D D', and the springs, x x, when the said parts are constructed and arrange substantially in the manner and for the purposes described.

2d, The combination and arrangement of the adjusting rod, n o", with the cylindrical sleeve, O', the sleeve or slide, O"', the post, P, and the reel, O"', in such a manner that while the post P, supports the reel, the elevation of the latter is adjusted by the compound rod, n o", substantially as and for the purposes specified.

3d, The rod, H, having the crank, h, and the worm, h', in combination with the worm segment, i, the shaft, I, the winding arm or segment, i', and the chain, K, substantially as and for the purpose specified.

71,990.-MACHINE FOR STRETCHING CLOTH.-A.C. Corpe, Stafford, Conn.

I claim, 1st, The two gear clamps, B B, composed each of two wheels, a a', one placed above the other, and the upper wheels arranged so as to be capable of adjustment, both vertically and laterally, substantially as shown and described.

2d, The arrangement of gearing, as shown, in connection with the gear clamps, B B, and roller, C, whereby an equal movement of the clamps is insured, substantially as shown and described.

3d, The supplemental frame, E, provided with the roller, D, upon which the cloth is wound, in connection with the gearing, k u, clutch, o, driving pulley, m, and shaft, l, all arranged substantially as shown and described.

71,991.-ROLLER FOR DRESSING.-Benjamin R. Cotton, Lewiston, Me.

I claim as an improved dresser roll, a stone roll covered with the surfacing metal, or metal composition, substantially as set forth.

Also, the method of surfacing a roll by placing around or over a central roll a metal frame as a base upon which to cement the surface metal, and the surfacing such frame, substantially as set forth.